No matter what profession you might find yourself in, there will often come a time when you are required to wear some form of personal protective equipment on your hands. These work gloves can be found in almost any profession that you care to name, but are often worn for completely different reasons. The overall purpose, to protect the wearer does remain the same though.
As an example think about those in the medical professions. Many will have seen surgeons, physicians and dentists all wearing those latex ones. They are there to prevent contamination between patient and doctor, and serve to illustrate this idea of personal protection. These are providing protection, but due to the material thickness, no sensation of touch is lost.
Also think of the old style butcher which used to be in every town. They use meat cleavers and sharp knives everyday. Some may remember seeing them wear a metal gauntlet, it used to look just like the old fashioned chain mail but if a knife happened to slip it would prevent then getting a nasty cut.
Then there are also the sides of meat which have to be collect from the refrigeration units. Quite often there will be sharp hooks, or similar implements, within these facilities. Therefore it is essential that a firm grip is maintained while lifting down the carcases down, and not losing the sensation in their fingertips as they handle the cold meat.
Even the military use various different patterns dependent upon their theater of operations, and their intended tasks. Imagine a service person working on an aircraft, inside the Arctic Circle while on exercise during the winter. They are going to face a wide range of challenges in the course of the working day.
If you haven't experienced these conditions they can be very bitter, and any skin which is left exposed will soon suffer. Now modern aircraft have metal surfaces, but below a certain temperature skin tends to stick to these surfaces. So it is important that the correct hand wear is worn to allow work to be done.
There are different styles for different tasks. For ordinary everyday tasks there are versions which have small rubberised blisters over the palms and fingers. With these blisters an individual can use tools and work on the aircraft as normal. Tools will not slip, or fall, from an individual's grasp.
Even such routine operations involving oils and fuels can be problematic. Any fuel which splashes onto any skin is liable to cause a cold burn. The normal hand wear with the rubber blisters will not afford the required protection as the whole hand needs protecting. So a pair made from cotton and coated in a rubberized compound is used. Even when not involved in operations everyone needs to cover up.
So the requirements for work gloves are many and varied, and much depends upon who will be wearing them. Too thin and they might not provide the required level of protection. Too thick and the wearer might not have the degree of touch which they would wish for. Also if they are made from the wrong material then they will not be suitable for the purpose.
As an example think about those in the medical professions. Many will have seen surgeons, physicians and dentists all wearing those latex ones. They are there to prevent contamination between patient and doctor, and serve to illustrate this idea of personal protection. These are providing protection, but due to the material thickness, no sensation of touch is lost.
Also think of the old style butcher which used to be in every town. They use meat cleavers and sharp knives everyday. Some may remember seeing them wear a metal gauntlet, it used to look just like the old fashioned chain mail but if a knife happened to slip it would prevent then getting a nasty cut.
Then there are also the sides of meat which have to be collect from the refrigeration units. Quite often there will be sharp hooks, or similar implements, within these facilities. Therefore it is essential that a firm grip is maintained while lifting down the carcases down, and not losing the sensation in their fingertips as they handle the cold meat.
Even the military use various different patterns dependent upon their theater of operations, and their intended tasks. Imagine a service person working on an aircraft, inside the Arctic Circle while on exercise during the winter. They are going to face a wide range of challenges in the course of the working day.
If you haven't experienced these conditions they can be very bitter, and any skin which is left exposed will soon suffer. Now modern aircraft have metal surfaces, but below a certain temperature skin tends to stick to these surfaces. So it is important that the correct hand wear is worn to allow work to be done.
There are different styles for different tasks. For ordinary everyday tasks there are versions which have small rubberised blisters over the palms and fingers. With these blisters an individual can use tools and work on the aircraft as normal. Tools will not slip, or fall, from an individual's grasp.
Even such routine operations involving oils and fuels can be problematic. Any fuel which splashes onto any skin is liable to cause a cold burn. The normal hand wear with the rubber blisters will not afford the required protection as the whole hand needs protecting. So a pair made from cotton and coated in a rubberized compound is used. Even when not involved in operations everyone needs to cover up.
So the requirements for work gloves are many and varied, and much depends upon who will be wearing them. Too thin and they might not provide the required level of protection. Too thick and the wearer might not have the degree of touch which they would wish for. Also if they are made from the wrong material then they will not be suitable for the purpose.
About the Author:
You can visit the website www.tasco-safety.com for more helpful information about The Purpose Of Work Gloves
No comments:
Post a Comment