There have been a drastic increase with reproduced fashion jewelries molded from antique and vintage original items. You may find a familiar design sold in many states from online shops to thrift stores and fashion boutiques. Most of these are even assembled and reproduced overseas and being sold here in the States. Often, known brands are being copied in various range of designs.
You will know that a wholesale costume jewelry has been copied from the original by the size alone. Most of these are larger than the originals because they have bigger molders. One effective way of identifying these is by having an accurate reference guide. It could be a book or an expert opinion from a trusted friend.
Apart from its size, the treatment thickness is also one identification factor for reproduced copies. These will have monotone colors with no softer shading looking like a low end item as people say. These often are gilded in bronze, vermillion, and silver and mostly made of plastic material.
Another thing you must know if you are meticulous in choosing a costume jewelry is to look at the company mark. The marking could change yearly depending on the company so if you compare a recently created original you might find them very different. Being updated on about the company can also help you with identifying such.
These differentiating characteristics are obvious because originals are handmade and reproduced copies are mass produced. In addition, the mountings can also be one thing that would separate an original from a copied version. The mounting on reproduced versions are usually casted while originals have mountings which are soldered altogether into one piece.
You will also observe that the former will have a tighter look compared to the latter which is has a lighter appearance. This is because there is little space between mountings with the replicated ones. If you happen to check the prong of your jewelry, you will observe either the prongs are thicker or these are thinly made.
To explain further, thick prongs are indicators that the jewelry is mass produced. It has such characteristic to firmly hold the stone together with the mount. In fact, these will often extend right up to the girdles. Conversely, vintage jewelry will have a thinner prong structure in order to display the beauty of the stones.
Moreover, mass manufactured jewelry will have unbent prongs because of production efficiency reasons. It is quite easy to just glue those stones directly than to spend time in bending prongs to give it a firmer hold. On one hand, originals will have bent prongs which are intentionally created to securely hold its stones.
If you have plans of buying jewelry through a wholesale store, please know if you like to buy the reproduced ones or the originals. The only line that divide both these identical items could be the quality and the price. It is not that bad to buy those reproduced if you know you are getting the value you are paying for. What is disappointing is that you pay for something less than the value of your time and money.
You will know that a wholesale costume jewelry has been copied from the original by the size alone. Most of these are larger than the originals because they have bigger molders. One effective way of identifying these is by having an accurate reference guide. It could be a book or an expert opinion from a trusted friend.
Apart from its size, the treatment thickness is also one identification factor for reproduced copies. These will have monotone colors with no softer shading looking like a low end item as people say. These often are gilded in bronze, vermillion, and silver and mostly made of plastic material.
Another thing you must know if you are meticulous in choosing a costume jewelry is to look at the company mark. The marking could change yearly depending on the company so if you compare a recently created original you might find them very different. Being updated on about the company can also help you with identifying such.
These differentiating characteristics are obvious because originals are handmade and reproduced copies are mass produced. In addition, the mountings can also be one thing that would separate an original from a copied version. The mounting on reproduced versions are usually casted while originals have mountings which are soldered altogether into one piece.
You will also observe that the former will have a tighter look compared to the latter which is has a lighter appearance. This is because there is little space between mountings with the replicated ones. If you happen to check the prong of your jewelry, you will observe either the prongs are thicker or these are thinly made.
To explain further, thick prongs are indicators that the jewelry is mass produced. It has such characteristic to firmly hold the stone together with the mount. In fact, these will often extend right up to the girdles. Conversely, vintage jewelry will have a thinner prong structure in order to display the beauty of the stones.
Moreover, mass manufactured jewelry will have unbent prongs because of production efficiency reasons. It is quite easy to just glue those stones directly than to spend time in bending prongs to give it a firmer hold. On one hand, originals will have bent prongs which are intentionally created to securely hold its stones.
If you have plans of buying jewelry through a wholesale store, please know if you like to buy the reproduced ones or the originals. The only line that divide both these identical items could be the quality and the price. It is not that bad to buy those reproduced if you know you are getting the value you are paying for. What is disappointing is that you pay for something less than the value of your time and money.
About the Author:
If you are looking for information on wholesale costume jewelry, go to the web pages online here today. You can see details at http://wholesalefashioninc.com now.
No comments:
Post a Comment